(Scholars' Lab Makerspace, 3D Printers)
Description
Equipment Info
Software: PrusaSlicer
Features:
- Dimensions: 500×550×400 mm
- Build area: 250×210×220 mm (w×d×h)
- Layer height: 0.05 - 0.30 mm
- 1.75mm filaments
- 0.4mm nozzle
- Removable Print sheets
How to use this printer
Step 1: Get a Model
Get a 3D model. Some places to find models are:
- https://printables.com
- https://thingiverse.com
- https://all3dp.com/1/free-stl-files-3d-printer-models-3d-print-files-stl-download/
Create your own models from scratch using software like Fusion 360, SolidWorks, Blender, and TinkerCad.
Scan an object. The Makerspace has a 3D scanner available, but the process takes several hours, so plan your time accordingly!
Step 2: Slice the Model
You must slice your model using the appropriate slicing software.
- Use PrusaSlicer for the FFF (Prusa) printers
- Use PreForm for the Resin (Form 2) printer
Step 3: Print the Model
Using Prusa Printers
- Find your model on-line or create it.
- Slice the object with PrusaSlicer. Double check that you have the correct printer selected and the correct filament.
- Check the printer for the following:
- The build plate is clean and seated correctly.
- The filament is inserted into the hot end and is not tangled on the spool.
- The correct filament is installed. PLA or PETG only. If you want a different filament, you first need to get approval from the Makerspace Manager.
- The printer is powered on.
- The nozzle is clear of hanging filament.
- In PrusaSlicer, click the “G” button, select “Upload and Print” then “OK”.
- Remain with the printer for the first 10 minutes to make sure it is printing correctly.
Removing the Model
- Let the build plate cool down.
- Lift the flexible build plate off of the heated bed using the front two corners.
- Lightly bend the plate using opposing corners. In most cases, your print will pop off the plate. If not, you can gently remove it by hand. Sometimes twisting the object a little can help.
- DO NOT USE SCREW DRIVERS FROM THE TOOL BOX!
Clean up after yourself!
- Put support material and other used filament in the blue recycle bin.